Installation Guide

Boss and Hiniker Plows

Using existing holes of the front cutting edge, the Back Drag Blade mounts between the front cutting edge and the mold board of the plow. When using this model it is not necessary to purchase a new front cutting edge. The Back Drag Blade has oval holes which allow the blade to be moved up or down in the case the front cutting edge is worn slightly. V-blade and Straight blade models mount the same way. All nuts and bolts are included with each blade.

Tools and Items needed:                                                                

  • 1 Socket and Wrench
  • 1 New Back Drag Blade
  • 1 Person a little time

 

Western Pro-Plow Models

Pro-Plow models mount on the back side of the plow and require that you drill all necessary holes for them to mount. To mount a Back Drag Edge on the Pro-Plow you must have a brand new front cutting edge installed on the plow. All nuts and bolts are included with each blade.

Tools and Items needed:

  • 1 Back Drag Blade
  • 1 New front cutting edge
  • 2 C-clamps
  • 1 Drill
  • 1 9/16" Drill bit
  • 1 Can of cutting oil for drilling
  • 2 people with a little time